eCatalog
  What's New
  Brackets
  Wires
  Specialized Wires
  Trident CNA arches / lengths
  Niti CT Intrusion Arch
  Multi Modulus
  Niti Wires
  Niti Springs
  Stainless Steel Wires
  Wire Tech Tips
  Helix & Palatal Bars
  Headgear
  Instruments
  How to Order
  Customer Survey

Metallurgical technology breakthrough....
A perfect orthodontic wire for your nickel-sensitive patients.

Trident CNA Beta III composition
  • 79% Titanium
  • 11% Molybdenum
  • 6% Zirconium
  • 4% Tin

Provides a moderate stiffness (approximately 42% of stainless steel), this wire can be deflected 100% more than stainless steel with no permanent deformation.

Trident CNA Beta III wire is perfect for stops and auxiliary loops.

Properties:

  • Safe for nickel sensitive patients.
  • Low modulus of elasticity.
  • High springback and flexibility.
  • Low force-deflection rate.
  • Moderate stiffness.
  • Good corrosion resistance.
  • Excellent formability
  • Weldable.
  • Smooth polished surface.

Clinical applications:

  • Moderate stiffness for root corrections
  • Formability allows for intricate loop designs.
  • Ductility allows for placement of tie-backs.
  • Smaller increments of force loss during deactivation compared to Stainless Steel
  • Spring-back is not lost by bending.
  • Able to fill bracket slots earlier and correct torque.
  • Overcorrection is possible by placing bends.
  • Allows for larger activations.
  • Gentle force delivery with larger archwire sizes.

Size Upper Lower
 0.016 BETA016U BETA016L
 0.018 BETA018U BETA018L
 0.032 BETA032U BETA032L
.016x.022 BETA16X22U BETA16X22L
.017x.025 BETA17X25U BETA17X25L
.018x.025 BETA18X25U BETA18X25L
.019x.025 BETA19X25U BETA19X25L
.021x.025 BETA21X25U BETA21X25L

Quantity Round Rectangular  
1-9 pks $45.00 $50.00
10-19 pks $40.00 $45.00
20-29 pks $36.00 $40.00
30 or more $28.50 $33.50 Packs of 10

 

Small round & rectangular lengths ideal for:

  • Sectional arches
  • Auxiliaries
  • Cantilevers to bring impacted cuspids out
  • Molar distalizing appliances - pendulum and pendex
  • Detailing archwire
  • Expansion appliance
  • Spring retainers
Quantity Round
Rectangular
1-9 pks $43.00
$45.00
10-19 pks $40.00
$43.00
20-29 pks $37.00
$39.00
30 or more $34.00
$36.00

Packs of 10 - 14inch lengths

Quantity Round  
1-9 pks $71.00  
10-19 pks $69.00  
20-29 pks $67.00  
30 or more $60.00  

Packs of 10 - 14inch lengths

Large round lengths ideal for:

  • .027 - .032 - .036 ideal retainer wire
  • .032 - .036 transpalatal arches
  • .032 - .036 palatal arches

Round   Rectangular
0.016   .016x.016
0.018   .016x.022
0.027   .017x.025
0.032   .018x.018
0.036   .018x.025
  .019x.025
  .021x.021
  .021x.025

The innovative Connecticut Intrusion Arch (CTA), developed by Dr. Ravindra Nanda, safely accomplishes the following:

  • Absolute intrusion of anterior teeth
  • Molar tip-back
  • Incisor flaring
  • Leveling anterior occlusal cants
  • Class II molar correction
  • “Preparing” molar anchorage
  • Correction of minor open-bites

Finishing
The Connecticut Intrusion Arch is made of nickel titanium and as a result, takes advantage of Niti’s unique memory and force properties. Available in two maxillary and two mandibular forms, each offered in two wire sizes. This appliance may be used with any prescription on the adult or mixed dentition and in both cases will provide light, continuous force distributions.

The Connecticut Intrusion Arch’s versatility, simple installation and minimal hardware requirements combine to make it a powerful new tool in orthodontic treatment.

Maxillary 34mm anterior
Long 22mm, .016" x .022"
Long 22mm, .017" x .025"
Short 15mm, .016" x .022"
Short 15mm, .017" x .025"
Mandibular 28mm anterior
Long 22mm, .016" x .022"
Long 22mm, .017" x .025"
Short 15mm, .016" x .022"
Short 15mm, .017" x .025"

Sold in Pks of 10
$40.00 per pk

Graduated forces throughout the arch!

These 'Special' Multi-Modulus archwires offer heat-activated, lower forces throughout the arch to meet today’s desire for ‘lower’ force tooth movement.

Three (3) heat-activated force levels in one archwire.

  • The anterior region has the lowest heat-activated force level, as the anterior teeth have the lightest roots.
  • The force level increases through the bicuspid region, having a slightly greater heat-activated force level to move the larger rooted bicuspids.
  • The posterior region has the greatest heat-activated force level of the archwire, for moving the strong-rooted molars.

Size Upper Lower
0.016 MM016U MM016L
0.018 MM018U MM018L
.016x.016 MM16X16U MM16X16L
.016x.022 MM16X22U MM16X22L
.017x.025 MM17X25U MM17X25L
.019x.025 MM19X25U MM19X25L
.016x.016 MM16X16U MM16X16L
.018X.018 MM18X18U MM18X18L
.020X.020 MM20X20U MM20X20L

 

$26.00 per pk
Sold in pks of 10
add 20 cents ea arch for dimpled

 
   

toll free:  1-888-942-2070 fax:  215-942-2072 email:  info@adentausa.com

home | eCatalog | how to order | about us | contact us | what's new | site map
Speedy Fax Order Form