Easy placement of bends and loops at chairside saves time! wire bendability makes it the perfect wire for custom tipping, aligning, space closure, rotation, and tooth movement. The resiliency and moderate tooth-moving force of makes it a great wire for mid- to late stages of treatment.  Working directly with our vendors to draw and roll our own wire to our tight quality specifications ensures that every archwire you purchase has consistently great formability and accurate activation range.  Along with preformed arches and specialized archwires, we offer a wide variety of 14 inch lengths. Large, round wire lengths are ideal as retainer wire in the fabrication of retention appliances and transpalatal/palatal arches. The formability and resiliency of the rectangle and small, round lengths allow for custom fabrication of molar distalizing appliances, spring arches, sectional arches, and other devices where intricate loops and bends are needed.

Properties:

• Safe for nickel sensitive patients.
• Low modulus of elasticity.
• High springback and flexibility.
• Low force-deflection rate.
• Moderate stiffness.
• Good corrosion resistance.
• Excellent formability
• Weldable.
• Smooth polished surface.

Clinical applications:

• Moderate stiffness for root corrections
• Formability allows for intricate loop designs.
• Ductility allows for placement of tie-backs.
• Smaller increments of force loss during deactivation compared to Stainless Steel
• Spring-back is not lost by bending.
• Able to fill bracket slots earlier and correct torque.
• Overcorrection is possible by placing bends.
• Allows for larger activations.
• Gentle force delivery with larger archwire sizes

Adenta's custom-developed, nickel-free wire offers excellent formability and moderate forces for mid- to late stage treatment. Offering easier ligation than stainless steel and moderate tooth-moving forces, wire allows for earlier use of rectangular wire for torque correction. Its formability is ideal for chairside placement of loops and bends for space closure, tipping, or focused tooth movement. Lengths are perfect for fabrication of auxiliary arches, retainer and palatal appliances, as well as devices requiring intricate bends or loops.

Round: .016   .018
Square: .016 x .016   .018 x .018
Rectangle: .016 x .022   .017 x .025   .018 x .025   .019 x .025   .021 x .025
OPTIMA available only in .016 x .022   .016 x .025   .017 x .025   .019 x .025

Length Wire Sizes All of the above wire sizes, as well as .027   .032   .036

Trident pre-formed Mushroom and T-Looped archwires.

Trident Looped Arches, with preformed Mushroom and T-Loops, are constructed of our nickel-free Beta Titanium alloy to provide consistent, gentle forces throughout treatment.

Trident Looped Arches provide significant benefits over Stainless Steel looped archwires.

Product Features

• Nickel-free Beta Titanium.
• Bendable.
• Smooth, polished surface.
• Less force.
• Larger activation range.
• Gradual force decay.

Treatment Benefits

• Space closure.
• Provides anterior intrusion/retraction.
• Allows torque or root movement of incisors.
• Control of root position of posterior teeth.
• Pre-formed loops and consistent force reduce chair time.
• Archwire segments can be activated independently.

Trident CNA Beta 3 Prelooped arches are a true convenience if you are looking for space closure, anterior intrusion/ retraction, and large activation range.  These versatile looped arches are produced under tight manufacturing process control to ensure consistent forces and shape.

Arch Form NAT2 Upper and Lower (proportional with the anterior loop spacing), with 2 Anterior Loops
24-30mm Lower arch form
32-56mm Upper arch form

Wire Sizes .016 x .022 .017 x .025 .019 x .025

Anterior Loop Spacing (measured from center of loops)
Mushroom Looped and T-Looped: 24mm – 42mm, in 2mm increments, & 46mm
Mushroom Looped only: 52mm and 56mm

Adenta's CTA® (Connecticut Intrusion Arches), developed in consultation with Dr. Ravindra Nanda, is a great tool for providing absolute intrusion of anterior teeth, molar tipback, incisor flaring,leveling of anterior occlusal cants, and more! CTA are available in either Nickel Titanium or CNA Beta 3 nickel-free , in both maxillary and mandibular forms.

Force can be adjusted by increasing or decreasing the bend at the posterior leg of the arch.

CTA - CNA Beta 3
• Nickel-free wire.
• Recommended for use in adult patients.
• Ideal for following NiTi CTA treatment.
• Ideal for extraction patients treated with sliding mechanics; the wire can be used for intraoral anchorage.

Nickel Titanium CTA
• Provides moderate, continuous forces over large activation range.
• Superelastic qualities.
• For adult or mixed dentition.

CTA form is specially designed for maximum efficiency.

Anterior Segment Lengths:
34mm: Maxillary
28mm: Mandibular

Premolar Segment Lengths:
Short: 15mm (available in Nickel Titanium version only)
Long: 22mm (available in Nickel Titanium and CNA Beta 3 version)

Wire Sizes .016 x .022 .017 x .025