Nickel Titanium with its biocompatibility is one of the few alloys that can be placed in the body without rejection, which makes it perfect for orthodontic treatment. Adenta’s Niti is manufactured with the purest grade of material available, providing the high quality you expect. The superelastic properties provide excellent shape recovery making it the ideal orthodontic wire.

Nickel Titanium Wire

Ideal for alignment and leveling in early to mid-stages of treatment.

All NiTi wires exhibit a unique “Superelastic” behavior.

Superelastic behavior provides:

• Light to moderate, consistent forces.
• Responsiveness to chilling.
• Near consistent force over a long activation period.
• Greater patient comfort over Stainless Steel wires.
• Excellent resiliency, resulting in high resistance to permanent set.
• High flexibility.
• Leveling, torque, and rotation can be addressed simultaneously early in treatment. No need to treat each of these individually, as is the case if using Stainless Steel wires.

 
Available Archforms:

Natural Form - Standard Form - Euro Form - Lingual Form 

(NiTi -approximately 55% Ni and 45% Ti):

Wire Sizes

 Round:  .012   .014   .016   .01  8 .020

Square:  .016 x .016   .018 x .018   .020 x .020

Rectangle:  .014 x .025   .016 x .022   .016 x .025   .017 x .025   .018 x .025  

Superelastic Nickel Titanium wire is also available in 7 in. lengths and 15 in. spools.

Lower friction equates to faster results! No question about it, Adenta’s Perfect-Ti Nickel Titanium wire produces 30% less friction between bracket and wire than traditional Nickel Titanium wire! The ultra smooth, hard black surface allows your customers to get to the finishing stage sooner by providing better sliding mechanics in early and mid-stage treatment. The shiny, black surface is nearly indistinguishable from regular NiTi in the mouth. Perfect-Ti Nickel Titanium wire is the choice for your doctors’ superelastic needs. Not only does the surface allow teeth to move faster but Perfect-Ti is our highest force Nickel Titanium offering.

• Reduces sliding friction by 30%.
• Our highest force NiTi wire offering.
• Excellent resiliency.
• The ultra smooth, hard black surface is an integral part of the NiTi wire no coating to chip or flake.
• Similar in appearance to regular NiTi wires when in the mouth.
• More economical than other friction-reducing archwires on the market.

Wire Sizes Round: .012   .014   .016   .018   .020

Square: .016 x .016

Rectangle: .016 x .022   .017 x .025   .018 x .025   .019 x .025   .021 x .025

Centermark All Perfect-Ti Archwires are centermarked with the Dimple® Centermark.

Nickel Titanium Torqued Arches are full-sized NiTi archwires with the anterior section pre-torqued to 20°. These specialized, preformed wires allow for the addition of torque into the anterior region while maintaining non-torque in the posterior regions.

• Provides 20° anterior torque.

• Three anterior torque segment widths available.

• Early introduction of torque in upper centrals and laterals.

• Provides uprighting torque in the lower anterior segment.

• Labial or lingual torque forces available by reversing wire orientation.

• Ideal for passive, self-ligating bracket systems.

• Nickel Titanium provides lower forces compared to Stainless Steel alternatives, as well as shape memory benefits of better resiliency and longer activation range.

Anterior Segments & Associated Centermark:

28mm (Lower), Single-Line Etch Centermark
34mm (Upper), 2-Line Etch Centermark
38mm (Upper), 3-Line Etch Centermark

Wire Sizes:  016 x .022   .017 x .025   .018 x .025   .019 x .025   .021 x .025

Etch line on arch leg provides reference of torque during placement

Adenta's CTA® (Connecticut Intrusion Arches), developed in consultation with Dr. Ravindra Nanda, is a great tool for providing absolute intrusion of anterior teeth, molar tipback, incisor flaring, leveling of anterior occlusal cants, and more! CTA are available in either Nickel Titanium or CNA Beta 3 nickel-free , in both maxillary and mandibular forms.

Force can be adjusted by increasing or decreasing the bend at the posterior leg of the arch.


Nickel Titanium CTA

• Provides moderate, continuous forces over large activation range.

• Superelastic qualities.

• For adult or mixed dentition.

CTA - CNA Beta 3

• Nickel-free wire.

• Recommended for use in adult patients.

• Ideal for following NiTi CTA treatment.

• Ideal for extraction patients treated with sliding mechanics; the wire can be used for intraoral anchorage

CTA form is specially designed for maximum efficiency.

Anterior Segment Lengths:
34mm: Maxillary
28mm: Mandibular

Premolar Segment Lengths:
Short: 15mm (available in Nickel Titanium version only)
Long: 22mm (available in Nickel Titanium and CNA Beta 3 version)

Wire Sizes .016 x .022   .017 x .025

Wire Sizes Round: .012   .014   .016   .018   .020

Square: .016 x .016   .018 x .018   .020 x .020

Rectangle: .016 x .022   .017 x .025   .018 x .025   .019 x .025   .021 x .025

These are our most popular wire sizes; however, all NiTi and Stainless Steel
wire size offerings are available in gold plate, with minimum order size.

Centermark Etch Centermark.